Front, angled view |
Sounds as good as ever, even after about 2 years in storage. Previously I had great difficulty convincing myself to put the unit back into storage. Took several months before I got around to it!
Bottom view, in storage box |
Top |
I had recapped the unit a few years ago as it took more than an hour before sounding right. When examined, all the EC(s) in the PSU board showed leaks. Other EC(s) in the pre and power amplifier section showed signs of usage over many years. Panasonic ECA/FC/FM, Rubycon, Vishay BC, OSCON, silver mica(s) and Wima(s) were used during the recapping. No replacement was performed on the tone control board, since these were hardly utilised.
The original plastic foam used for cushioning the buttons were so old they disintegrate upon touch! Hence I replaced them with similar sized equivalents. The resultant produces a nice cushioned feeling when depressing the buttons.
Top view, without cover |
Close-up of power amp section |
Close-up of phono section, after internal separator removed |
Apologies as I forgot to take a pix of the rear in my haste to get the beastie operational.
The current pix(s) does not show the pre-amp board as these are only visible once the face plate has been removed. The PSU board can be seen from the top but is mostly obscured by the mounting before the faceplate.
Will update the missing portions another day.
Found the following while searching the internet for reviews on the "not so common" G90X.
A Swedish Magazine begun 1983 to use "Anagraph" for displaying an amps behavior. When they 1986 checked AU-G11X and AU-G90X the comment was that (Translation) they never before got an anagraph so perfect as they got with AU-G90X. The only hint can be seen at 50kHz and 100W but this hint is the smallest we have seen. Output power at clipping is stated to be 150W at 8 ohms but we measured 170W across whole frequency range
Anagraph for the AU-G90X |