In the late 1980's I literally fell "head-over-heels" for the Celestion SL-6 after listening to a pair at my friend's place in NZ.
By the time I scaped enough to buy a pair with a proper amplifier for them, the SL-6 was no longer available and had been replaced by the SL-6s. Hence I bought a pair of SL-6s instead, with the metal sand filled stands from the local NZ agent via the home based hifi dealer at the shore (aka North Shore to Aucklanders).
I still own that pair of SL-6s but have not used them since about 2006. Hence I enclosed pixs from the net till I have the urge to drag them out for a spin.
 |
| Pix of the SL6s from the internet |
As there are so many articles and reviews on the SL6s, there is no need to repeat the obvious. I will just add on item(s) I discovered along the years of ownership.
I always admired the beautiful wooden finish as the bark rings would flow seamlessly from one panel to another, on each of the speakers. Many a visitors who's seen the pair always pester for a sale (told them if you want them, compensate me for my loss as I never put them up for sale)... still have them, these are REAL KEEPERS!
From memory the SL6s require plenty of grunt to be be driven properly, rather than Watts. Once so, they are real pleasers. The bass deficiency can be addressed using a active sub (suitable for hifi not HT). If I remember correctly, the active sub need to be set to somewhere in the region of 125-150Hz with volume just about 1-o'clock - TBC once I dig out the sub as well!!!
For instance, I was using the SL6s with a Sansui AU-555 before putting them into storage. Watts was not so much the issue as grunt. The AU-555 is rated as 20W per channel with only a Damping Factor of 12. Many advise using an amp of atleast 50-60W for the task. Yet, the Sansui AU-555 could drive the SL6s beautifully to decent volumes with the volume knob at 10 o'clock and/or above. No issues doing so for atleast 8hrs a day on the weekends.
Another surprise was when I swap out the SL6s (86dB) with the Meridian A500 (89dB) - the output volume remained roughly the same.
Hands getting itchy now since this bring backs bloody fond memories of my years spend with the SL6s ...
